SAE AIR6037 Aircraft Exhaust Nonvolatile Particle Matter Measurement Method Development

时间:2024-05-05 18:55:36 来源: 标准资料网 作者:标准资料网 阅读:8710
下载地址: 点击此处下载
Product Code:SAE AIR6037
Title:Aircraft Exhaust Nonvolatile Particle Matter Measurement Method Development
Issuing Committee:E-31 Aircraft Exhaust Emissions Measurement Committee
Scope:This report provides current practice measurement methods for quantifying non-volatile particle matter at the exit plane of aircraft gas turbine engines. This document contains detailed information for many instruments and techniques, described in AIR 5892, that have been applied in aircraft engine field tests since AIR 5892 was first issued in April 2003. There are four sections, identified as Technical Appendices (TA), presenting measurement techniques, sampling, and quantification of non-volatile particles. The sections are written in the format of an Aerospace Recommended Practice (ARP) and intended to progress to recommended practices upon overcoming existing technical challenges. Many important technical advances have been accomplished that comprise the Aircraft Exhaust Non-volatile Particle Matter Measurement Method Development techniques described in TA-1: Particle Mass, TA-2: Particle Number and Size, TA-3: Particle Sampling, and TA-4: Calculation of Particle Number and Particle Mass Emission Indices. Various measurement methodologies and test operability and compatibility issues are described within the TAa??s. The TAa??s briefly discuss degrees of sensitivity, accuracy, repeatability, and test operations acceptability for each measurement discipline. They reflect that many important technical advances have been accomplished for measurement techniques of non-volatile particles. Additional research is required to transition the TAa??s to Aerospace Recommended Practices.
基本信息
标准名称:导柱座
中标分类: 机械 >> 工艺装备 >> 组合卡具
发布日期:1989-07-12
实施日期:1989-12-01
首发日期:1900-01-01
作废日期:1900-01-01
出版日期:1900-01-01
页数:1页
适用范围

没有内容

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 机械 工艺装备 组合卡具
基本信息
标准名称:土方机械 安全 第2部分:推土机的要求
英文名称:Earth-moving machinery - Safety - Part 2: Requirements for tractor-dozers
中标分类: 工程建设 >> 施工机械设备 >> 建筑工程施工机械
ICS分类: 材料储运设备 >> 土方机械
发布部门:中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会
发布日期:2010-12-23
实施日期:2012-01-01
首发日期:2010-12-23
作废日期:
主管部门:全国土方机械标准化技术委员会(SAC/TC 334)
提出单位:中国机械工业联合会
归口单位:全国土方机械标准化技术委员会(SAC/TC 334)
起草单位:天津工程机械研究院、厦门厦工机械股份有限公司、天津移山工程机械有限公司
起草人:李广庆、李蔚苹、谢观福、察春光、刘建国、王新香、雷俊朝、崔惠
出版社:中国标准出版社
出版日期:2012-01-01
页数:12页
适用范围

GB25684的本部分规定了轮胎式和履带式推土机及其后置绞盘的安全要求,并给出了推土机的图例(见附录A)。
本部分与GB25684.1(规定了土方机械的通用安全要求)合并使用。本部分的特定要求优先于GB25684.1的通用要求。
本部分适用于GB/T8498定义的轮胎式和履带式推土机。
本部分规定了本范围的土方机械在制造商指定用途和预知的误操作条件下应用时,与其相关的所有重大危险、危险状态或危险事件;并规定了在使用、操作和维护中消除或降低重大危险、危险状态或危险事件引起的风险的技术措施。
本部分不适用于在本部分实施前制造的机器。z

前言

没有内容

目录

没有内容

引用标准

下列文件中的条款通过GB25684的本部分的引用而成为本部分的条款。凡是注日期的引用文件,其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本部分,然而,鼓励根据本部分达成协议的各方研究是否可使用这些文件的最新版本。凡是不注日期的引用文件,其最新版本适用于本部分。
GB/T8419 土方机械 司机座椅振动的试验室评价(GB/T8419—2007,ISO7096:2000,IDT)
GB/T8498 土方机械 基本类型 识别、术语和定义(GB/T8498—2008,ISO6165:2006,IDT)
GB/T8590 推土机 术语(GB/T8590—2001,eqvISO6747:1998)
GB/T8593.2 土方机械 司机操纵装置和其他显示装置用符号 第2部分:机器、工作装置和附件的特殊符号(GB/T8593.2—2010,ISO6405-2:1993,IDT)
GB/T8595 土方机械 司机的操纵装置(GB/T8595—2008,ISO10968:2004,IDT)
GB20178 土方机械 安全标志和危险图示 通则(GB20178—2006,ISO9244:1995,MOD)
GB/T21154 土方机械 整机及其工作装置和部件的质量测量方法(GB/T21154—2007,ISO6016:1998,IDT)
GB25684.1—2010 土方机械 安全 第1部分:通用要求(ISO20474-1:2008,MOD)
LY1289 林业机械 车载式绞盘机 尺寸、性能和安全要求(LY1289—2008,ISO19472:2006,IDT)
ISO3411:2007 土方机械 司机的身材尺寸与司机的最小活动空间(Earth-movingmachinery—Physicaldimensionsofoperatorsandminimumoperatorspaceenvelope)

所属分类: 工程建设 施工机械设备 建筑工程施工机械 材料储运设备 土方机械